Injector Loosener Injec Aid has the molecular structure adapted to coal and rust.
Did you know?
Injec aid will unlock the guns, without the need for excessive mechanical action.
Ease of removal!
Injector Loosener Injec Aid with PTFE lubricant to help removal.
Remove the first crust of coal and rust with Carbon Off for easy access.
Injector Loosener Injec Aid
Effective solution to blocked injectors. To remove the injectors and spark plugs jammed by rust and charcoal. Specially formulated,Injector Loosener Injec Aid has active ingredients that penetrate rapidly into the deeper layers of rust and coal due to microcracks and dissolve rust. Allows for quick removal without danos.Injector Loosener Injec Aid is also incorporated PTFE particles to improve the sliding properties and facilitate dismantling. Eliminates the water and prevents new rust free acids and silicones.
Properties of Injector Loosener Injec Aid
Solvent for spark plugs and injectors ensures easy removal of injectors. Injector Loosener Injec Aid achieves excellent results: its high penetration warrants that the product acts directly on the injector seat. The action of the special formula allows the rust and dirt are removed without damaging the injector. PTFE particles with excellent lubricating properties allow you to easily remove the nozzle from the cylinder head. To facilitate the handling and application of the product in the injector nozzles Injector Loosener Injec Aid is provided with a spray tube.
Moisture is often the cause of rust formed in the injector bank. When it rains, the water flows through the windshield, for example, and concentrated near the cylinder head, it is only a matter of time before entering the joint, thus causing corrosion on the bench gun. Corroded spark plugs and injectors can only be disassembled often with a special tool, and thus sometimes causing damage them time-consuming and difficult to repair damage.
How to use:
Shake can before use. Remove any thick soiling. Spray the product directly on the seat of the parts to be loosened and allow it to react for 30-45 minutes. Remove loosened dirt using compressed air. Then, spray the product generously and directly on the cylinder head seat. Allow the active substance to react for approx. 5 minutes. Allow the product to react over night in the case of stubborn rust.
Using Injector Loosener Injec Aid
Although Injector Loosener Injec Aid clean and loose, usually the first layer of outer coal is very strong and solid. For this initial crust is recommended to clean it with 2max Carbon Off.