Restore heater efficiency caused by poor circulation.
Did you know?
If your car heats up repeatedly, then your radiator is underperforming.
No mecanics hand!
Helpfull tool to restore motorbike perfomance with cost reducion
Extra care must be taken in order for you to extend its life
Koolclean Radiator Fush
Koolclean dissolves and binds residue containing oil and grease. Gets under sludge and corrosion deposits and removes them. Neutralises lime scale residue. Koolclean Cooling System Flush will provide the following performance benefits:
• Dissolve and loosen scale and rust build up from the internal surfaces of the radiator and water jacket of the engine • Restore heater efficiency caused by poor circulation • Restore cooling system efficiency to operate at designed temperature • Remove the gel formed when Mono Ethylene Glycol-based antifreeze and OAT coolant is mixed
Koolclean Cooling System Flush is a blend of inorganic acids and inhibitors designed to remove scale and rust build up from the cooling system. Koolclean Cooling System Flush will not damage any cooling system components when used as directed and is compatible with all glycol-based antifreeze formulations and OAT coolants. In order to maintain optimum cooling system efficiency and engine performance, it is recommended that the cooling systems of automotive vehicles be flushed out with Forté Cooling System Flush at least once every year. Note: Koolclean Cooling System Conditioner should be added to the coolant when refilling the cooling system to ensure ongoing protection against corrosion and scale build-up.
How to use
Add to the cooling system, turn on the heating and let the engine run for about 15 to 40 minutes at a raised (2500 rpm) idle level. Than stop the engine and remove cooling liquid. Rinse shortly with clear water and fill up the system with new cooling liquid.